Платные хостинги     Раскрутка сайта     Книги по программированию

Коды ошибок..., недюсь кому-нибудь понадобится

- 1: Incorrect function2: The system cannot find the file specified3: The system cannot find the path specified4: The system cannot open the file5: Access is denied6: The handle is invalid7: The storage control blocks were destroyed8: Not enough storage is available to process this command9: The storage control block address is invalid10: The environment is incorrect11: An attempt was made to load a program with an incorrect format12: The access code is invalid13: The data is invalid14: Not enough storage is available to complete this operation15: The system cannot find the drive specified16: The directory cannot be removed17: The system cannot move the file to a different disk drive18: There are no more files19: The media is write protected20: The system cannot find the device specified21: The device is not ready22: The device does not recognize the command23: Data error (cyclic redundancy check)24: The program issued a command but the command length is incorrect25: The drive cannot locate a specific area or track on the disk26: The specified disk or diskette cannot be accessed27: The drive cannot find the sector requested28: The printer is out of paper29: The system cannot write to the specified device30: The system cannot read from the specified device31: A device attached to the system is not functioning32: The process cannot access the file because it is being used by another process33: The process cannot access the file because another process has locked a portion of the file34: The wrong diskette is in the drive.Insert %2 (Volume Serial Number: %3) into drive %136: Too many files opened for sharing38: Reached the end of the file39: The disk is full50: The request is not supported51: Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator52: You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again53: The network path was not found54: The network is busy55: The specified network resource or device is no longer available56: The network BIOS command limit has been reached57: A network adapter hardware error occurred58: The specified server cannot perform the requested operation59: An unexpected network error occurred60: The remote adapter is not compatible61: The printer queue is full62: Space to store the file waiting to be printed is not available on the server63: Your file waiting to be printed was deleted64: The specified network name is no longer available65: Network access is denied66: The network resource type is not correct67: The network name cannot be found68: The name limit for the local computer network adapter card was exceeded69: The network BIOS session limit was exceeded70: The remote server has been paused or is in the process of being started71: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept72: The specified printer or disk device has been paused80: The file exists82: The directory or file cannot be created83: Fail on INT 2484: Storage to process this request is not available85: The local device name is already in use86: The specified network password is not correct87: The parameter is incorrect88: A write fault occurred on the network89: The system cannot start another process at this time100: Cannot create another system semaphore101: The exclusive semaphore is owned by another process102: The semaphore is set and cannot be closed103: The semaphore cannot be set again104: Cannot request exclusive semaphores at interrupt time105: The previous ownership of this semaphore has ended106: Insert the diskette for drive %1107: The program stopped because an alternate diskette was not inserted108: The disk is in use or locked by another process109: The pipe has been ended110: The system cannot open the device or file specified111: The file name is too long112: There is not enough space on the disk113: No more internal file identifiers available114: The target internal file identifier is incorrect117: The IOCTL call made by the application program is not correct118: The verify-on-write switch parameter value is not correct119: The system does not support the command requested120: This function is not supported on this system121: The semaphore timeout period has expired122: The data area passed to a system call is too small123: The filename, directory name, or volume label syntax is incorrect124: The system call level is not correct125: The disk has no volume label126: The specified module could not be found127: The specified procedure could not be found128: There are no child processes to wait for129: The %1 application cannot be run in Win32 mode130: Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O131: An attempt was made to move the file pointer before the beginning of the file132: The file pointer cannot be set on the specified device or file133: A JOIN or SUBST command cannot be used for a drive that contains previously joined drives134: An attempt was made to use a JOIN or SUBST command on a drive that has already been joined135: An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted136: The system tried to delete the JOIN of a drive that is not joined137: The system tried to delete the substitution of a drive that is not substituted138: The system tried to join a drive to a directory on a joined drive139: The system tried to substitute a drive to a directory on a substituted drive140: The system tried to join a drive to a directory on a substituted drive141: The system tried to SUBST a drive to a directory on a joined drive142: The system cannot perform a JOIN or SUBST at this time143: The system cannot join or substitute a drive to or for a directory on the same drive144: The directory is not a subdirectory of the root directory145: The directory is not empty146: The path specified is being used in a substitute147: Not enough resources are available to process this command148: The path specified cannot be used at this time149: An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute150: System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed151: The number of specified semaphore events for DosMuxSemWait is not correct152: DosMuxSemWait did not execute; too many semaphores are already set153: The DosMuxSemWait list is not correct154: The volume label you entered exceeds the label character limit of the target file system155: Cannot create another thread156: The recipient process has refused the signal157: The segment is already discarded and cannot be locked158: The segment is already unlocked159: The address for the thread ID is not correct160: One or more arguments are not correct161: The specified path is invalid162: A signal is already pending 164: No more threads can be created in the system167: Unable to lock a region of a file170: The requested resource is in use173: A lock request was not outstanding for the supplied cancel region174: The file system does not support atomic changes to the lock type180: The system detected a segment number that was not correct182: The operating system cannot run %1183: Cannot create a file when that file already exists186: The flag passed is not correct187: The specified system semaphore name was not found188: The operating system cannot run %1189: The operating system cannot run %1190: The operating system cannot run %1191: Cannot run %1 in Win32 mode192: The operating system cannot run %1193: %1 is not a valid Win32 application194: The operating system cannot run %1195: The operating system cannot run %1196: The operating system cannot run this application program197: The operating system is not presently configured to run this application198: The operating system cannot run %1199: The operating system cannot run this application program200: The code segment cannot be greater than or equal to 64K201: The operating system cannot run %1202: The operating system cannot run %1203: The system could not find the environment option that was entered205: No process in the command subtree has a signal handler206: The filename or extension is too long207: The ring 2 stack is in use208: The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified209: The signal being posted is not correct210: The signal handler cannot be set212: The segment is locked and cannot be reallocated214: Too many dynamic-link modules are attached to this program or dynamic-link module215: Cannot nest calls to LoadModule216: The image file %1 is valid, but is for a machine type other than the current machine230: The pipe state is invalid231: All pipe instances are busy232: The pipe is being closed233: No process is on the other end of the pipe234: More data is available240: The session was canceled254: The specified extended attribute name was invalid255: The extended attributes are inconsistent258: The wait operation timed out259: No more data is available266: The copy functions cannot be used267: The directory name is invalid275: The extended attributes did not fit in the buffer276: The extended attribute file on the mounted file system is corrupt277: The extended attribute table file is full278: The specified extended attribute handle is invalid282: The mounted file system does not support extended attributes288: Attempt to release mutex not owned by caller298: Too many posts were made to a semaphore299: Only part of a ReadProcessMemory or WriteProcessMemory request was completed300: The oplock request is denied301: An invalid oplock acknowledgment was received by the system302: The volume is too fragmented to complete this operation303: The file cannot be opened because it is in the process of being deleted317: The system cannot find message text for message number 0x%1 in the message file for %2487: Attempt to access invalid address534: Arithmetic result exceeded 32 bits535: There is a process on other end of the pipe536: Waiting for a process to open the other end of the pipe994: Access to the extended attribute was denied995: The I/O operation has been aborted because of either a thread exit or an application request996: Overlapped I/O event is not in a signaled state997: Overlapped I/O operation is in progress998: Invalid access to memory location999: Error performing inpage operation1001: Recursion too deep; the stack overflowed1002: The window cannot act on the sent message1003: Cannot complete this function1004: Invalid flags1005: The volume does not contain a recognized file system.Please make sure that all required file system drivers are loaded and that the volume is not corrupted1006: The volume for a file has been externally altered so that the opened file is no longer valid1007: The requested operation cannot be performed in full-screen mode1008: An attempt was made to reference a token that does not exist1009: The configuration registry database is corrupt1010: The configuration registry key is invalid1011: The configuration registry key could not be opened1012: The configuration registry key could not be read1013: The configuration registry key could not be written1014: One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful1015: The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted1016: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry1017: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format1018: Illegal operation attempted on a registry key that has been marked for deletion1019: System could not allocate the required space in a registry log1020: Cannot create a symbolic link in a registry key that already has subkeys or values1021: Cannot create a stable subkey under a volatile parent key1022: A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes1051: A stop control has been sent to a service that other running services are dependent on1052: The requested control is not valid for this service1053: The service did not respond to the start or control request in a timely fashion1054: A thread could not be created for the service1055: The service database is locked1056: An instance of the service is already running1057: The account name is invalid or does not exist, or the password is invalid for the account name specified1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it1059: Circular service dependency was specified1060: The specified service does not exist as an installed service1061: The service cannot accept control messages at this time1062: The service has not been started1063: The service process could not connect to the service controller1064: An exception occurred in the service when handling the control request1065: The database specified does not exist1066: The service has returned a service-specific error code1067: The process terminated unexpectedly1068: The dependency service or group failed to start1069: The service did not start due to a logon failure1070: After starting, the service hung in a start-pending state1071: The specified service database lock is invalid1072: The specified service has been marked for deletion1073: The specified service already exists1074: The system is currently running with the last-known-good configuration1075: The dependency service does not exist or has been marked for deletion1076: The current boot has already been accepted for use as the last-known-good control set1077: No attempts to start the service have been made since the last boot1078: The name is already in use as either a service name or a service display name1079: The account specified for this service is different from the account specified for other services running in the same process1080: Failure actions can only be set for Win32 services, not for drivers1081: This service runs in the same process as the service control manager.Therefore, the service control manager cannot take action if this service's process terminates unexpectedly1082: No recovery program has been configured for this service1083: The executable program that this service is configured to run in does not implement the service1084: This service cannot be started in Safe Mode1100: The physical end of the tape has been reached1101: A tape access reached a filemark1102: The beginning of the tape or a partition was encountered1103: A tape access reached the end of a set of files1104: No more data is on the tape1105: Tape could not be partitioned1106: When accessing a new tape of a multivolume partition, the current block size is incorrect1107: Tape partition information could not be found when loading a tape1108: Unable to lock the media eject mechanism1109: Unable to unload the media1110: The media in the drive may have changed1111: The I/O bus was reset1112: No media in drive1113: No mapping for the Unicode character exists in the target multi-byte code page1114: A dynamic link library (DLL) initialization routine failed1115: A system shutdown is in progress1116: Unable to abort the system shutdown because no shutdown was in progress1117: The request could not be performed because of an I/O device error1118: No serial device was successfully initialized. The serial driver will unload1119: Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened1120: A serial I/O operation was completed by another write to the serial port.(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)1121: A serial I/O operation completed because the timeout period expired.(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)1122: No ID address mark was found on the floppy disk1123: Mismatch between the floppy disk sector ID field and the floppy disk controller track address1124: The floppy disk controller reported an error that is not recognized by the floppy disk driver1125: The floppy disk controller returned inconsistent results in its registers1126: While accessing the hard disk, a recalibrate operation failed, even after retries1127: While accessing the hard disk, a disk operation failed even after retries1128: While accessing the hard disk, a disk controller reset was needed, but even that failed1129: Physical end of tape encountered1130: Not enough server storage is available to process this command1131: A potential deadlock condition has been detected1132: The base address or the file offset specified does not have the proper alignment1140: An attempt to change the system power state was vetoed by another application or driver1141: The system BIOS failed an attempt to change the system power state1142: An attempt was made to create more links on a file than the file system supports1150: The specified program requires a newer version of Windows1151: The specified program is not a Windows or MS-DOS program1152: Cannot start more than one instance of the specified program1153: The specified program was written for an earlier version of Windows1154: One of the library files needed to run this application is damaged1155: No application is associated with the specified file for this operation1156: An error occurred in sending the command to the application1157: One of the library files needed to run this application cannot be found1158: The current process has used all of its system allowance of handles for Window Manager objects1159: The message can be used only with synchronous operations1160: The indicated source element has no media1161: The indicated destination element already contains media1162: The indicated element does not exist1163: The indicated element is part of a magazine that is not present1164: The indicated device requires reinitialization due to hardware errors1165: The device has indicated that cleaning is required before further operations are attempted1166: The device has indicated that its door is open1167: The device is not connected1168: Element not found1169: There was no match for the specified key in the index1170: The property set specified does not exist on the object1171: The point passed to GetMouseMovePoints is not in the buffer1172: The tracking (workstation) service is not running1173: The Volume ID could not be found1175: Unable to remove the file to be replaced1176: Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name1177: Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name1178: The volume change journal is being deleted1179: The volume change journal is not active1180: A file was found, but it may not be the correct file1181: The journal entry has been deleted from the journal1200: The specified device name is invalid1201: The device is not currently connected but it is a remembered connection1202: The local device name has a remembered connection to another network resource1203: No network provider accepted the given network path1204: The specified network provider name is invalid1205: Unable to open the network connection profile1206: The network connection profile is corrupted1207: Cannot enumerate a noncontainer1208: An extended error has occurred1209: The format of the specified group name is invalid1210: The format of the specified computer name is invalid1211: The format of the specified event name is invalid1212: The format of the specified domain name is invalid1213: The format of the specified service name is invalid1214: The format of the specified network name is invalid1215: The format of the specified share name is invalid1216: The format of the specified password is invalid1217: The format of the specified message name is invalid1218: The format of the specified message destination is invalid1219: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again1220: An attempt was made to establish a session to a network server, but there are already too many sessions established to that server1221: The workgroup or domain name is already in use by another computer on the network1222: The network is not present or not started1223: The operation was canceled by the user1224: The requested operation cannot be performed on a file with a user-mapped section open1225: The remote system refused the network connection1226: The network connection was gracefully closed1227: The network transport endpoint already has an address associated with it1228: An address has not yet been associated with the network endpoint1229: An operation was attempted on a nonexistent network connection1230: An invalid operation was attempted on an active network connection1231: The network location cannot be reached. For information about network troubleshooting, see Windows Help1232: The network location cannot be reached. For information about network troubleshooting, see Windows Help1233: The network location cannot be reached. For information about network troubleshooting, see Windows Help1234: No service is operating at the destination network endpoint on the remote system1235: The request was aborted1236: The network connection was aborted by the local system1237: The operation could not be completed. A retry should be performed1238: A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached1239: Attempting to log in during an unauthorized time of day for this account1240: The account is not authorized to log in from this station1241: The network address could not be used for the operation requested1242: The service is already registered1243: The specified service does not exist1244: The operation being requested was not performed because the user has not been authenticated1245: The operation being requested was not performed because the user has not logged on to the network.The specified service does not exist1246: Continue with work in progress1247: An attempt was made to perform an initialization operation when initialization has already been completed1248: No more local devices1249: The specified site does not exist1250: A domain controller with the specified name already exists1251: This operation is supported only when you are connected to the server1252: The group policy framework should call the extension even if there are no changes1253: The specified user does not have a valid profile1254: This operation is not supported on a Microsoft Small Business Server1255: The server machine is shutting down1256: The remote system is not available. For information about network troubleshooting, see Windows Help1257: The security identifier provided is not from an account domain1258: The security identifier provided does not have a domain component1259: AppHelp dialog canceled thus preventing the application from starting1260: Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator1261: A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific1262: The share is currently offline or does not exist1263: The kerberos protocol encountered an error while validating theKDC certificate during smartcard logon1264: The kerberos protocol encountered an error while attempting to utilizethe smartcard subsystem1265: The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you1266: The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log1267: An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator1268: The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator1269: The smartcard certificate used for authentication was not trusted. Please contact your system administrator1270: The smartcard certificate used for authentication has expired. Please contact your system administrator1271: The machine is locked and can not be shut down without the force option1273: An application-defined callback gave invalid data when called1274: The group policy framework should call the extension in the synchronous foreground policy refresh1275: This driver has been blocked from loading1276: A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image1300: Not all privileges referenced are assigned to the caller1301: Some mapping between account names and security IDs was not done1302: No system quota limits are specifically set for this account1303: No encryption key is available. A well-known encryption key was returned1304: The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string1305: The revision level is unknown1306: Indicates two revision levels are incompatible1307: This security ID may not be assigned as the owner of this object1308: This security ID may not be assigned as the primary group of an object1309: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client1310: The group may not be disabled1311: There are currently no logon servers available to service the logon request1312: A specified logon session does not exist. It may already have been terminated1313: A specified privilege does not exist1314: A required privilege is not held by the client1315: The name provided is not a properly formed account name1316: The specified user already exists1317: The specified user does not exist1318: The specified group already exists1319: The specified group does not exist1320: Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member1321: The specified user account is not a member of the specified group account1322: The last remaining administration account cannot be disabled or deleted1323: Unable to update the password. The value provided as the current password is incorrect1324: Unable to update the password. The value provided for the new password contains values that are not allowed in passwords1325: Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain1326: Logon failure: unknown user name or bad password1327: Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced1328: Logon failure: account logon time restriction violation1329: Logon failure: user not allowed to log on to this computer1330: Logon failure: the specified account password has expired1331: Logon failure: account currently disabled1332: No mapping between account names and security IDs was done1333: Too many local user identifiers (LUIDs) were requested at one time1334: No more local user identifiers (LUIDs) are available1335: The subauthority part of a security ID is invalid for this particular use1336: The access control list (ACL) structure is invalid1337: The security ID structure is invalid1338: The security descriptor structure is invalid1340: The inherited access control list (ACL) or access control entry (ACE) could not be built1341: The server is currently disabled1342: The server is currently enabled1343: The value provided was an invalid value for an identifier authority1344: No more memory is available for security information updates1345: The specified attributes are invalid, or incompatible with the attributes for the group as a whole1346: Either a required impersonation level was not provided, or the provided impersonation level is invalid1347: Cannot open an anonymous level security token1348: The validation information class requested was invalid1349: The type of the token is inappropriate for its attempted use1350: Unable to perform a security operation on an object that has no associated security1351: Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied1352: The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation1353: The domain was in the wrong state to perform the security operation1354: This operation is only allowed for the Primary Domain Controller of the domain1355: The specified domain either does not exist or could not be contacted1356: The specified domain already exists1357: An attempt was made to exceed the limit on the number of domains per server1358: Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk1359: An internal error occurred1360: Generic access types were contained in an access mask which should already be mapped to nongeneric types1361: A security descriptor is not in the right format (absolute or self-relative)1362: The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process1363: Cannot start a new logon session with an ID that is already in use1364: A specified authentication package is unknown1365: The logon session is not in a state that is consistent with the requested operation1366: The logon session ID is already in use1367: A logon request contained an invalid logon type value1368: Unable to impersonate using a named pipe until data has been read from that pipe1369: The transaction state of a registry subtree is incompatible with the requested operation1370: An internal security database corruption has been encountered1371: Cannot perform this operation on built-in accounts1372: Cannot perform this operation on this built-in special group1373: Cannot perform this operation on this built-in special user1374: The user cannot be removed from a group because the group is currently the user's primary group1375: The token is already in use as a primary token1376: The specified local group does not exist1377: The specified account name is not a member of the local group1378: The specified account name is already a member of the local group1379: The specified local group already exists1380: Logon failure: the user has not been granted the requested logon type at this computer1381: The maximum number of secrets that may be stored in a single system has been exceeded1382: The length of a secret exceeds the maximum length allowed1383: The local security authority database contains an internal inconsistency1384: During a logon attempt, the user's security context accumulated too many security IDs1385: Logon failure: the user has not been granted the requested logon type at this computer1386: A cross-encrypted password is necessary to change a user password1387: A member could not be added to or removed from the local group because the member does not exist1388: A new member could not be added to a local group because the member has the wrong account type1389: Too many security IDs have been specified1390: A cross-encrypted password is necessary to change this user password1391: Indicates an ACL contains no inheritable components1392: The file or directory is corrupted and unreadable1393: The disk structure is corrupted and unreadable1394: There is no user session key for the specified logon session1395: The service being accessed is licensed for a particular number of connections.No more connections can be made to the service at this time because there are already as many connections as the service can accept1396: Logon Failure: The target account name is incorrect1397: Mutual Authentication failed. The server's password is out of date at the domain controller1398: There is a time and/or date difference between the client and server1399: This operation can not be performed on the current domain1400: Invalid window handle1401: Invalid menu handle1402: Invalid cursor handle1403: Invalid accelerator table handle1404: Invalid hook handle1405: Invalid handle to a multiple-window position structure1406: Cannot create a top-level child window1407: Cannot find window class1408: Invalid window; it belongs to other thread1409: Hot key is already registered1410: Class already exists1411: Class does not exist1412: Class still has open windows1413: Invalid index1414: Invalid icon handle1415: Using private DIALOG window words1416: The list box identifier was not found1417: No wildcards were found1418: Thread does not have a clipboard open1419: Hot key is not registered1420: The window is not a valid dialog window1421: Control ID not found1422: Invalid message for a combo box because it does not have an edit control1423: The window is not a combo box1424: Height must be less than 2561425: Invalid device context (DC) handle1426: Invalid hook procedure type1427: Invalid hook procedure1428: Cannot set nonlocal hook without a module handle1429: This hook procedure can only be set globally1430: The journal hook procedure is already installed1431: The hook procedure is not installed1432: Invalid message for single-selection list box1433: LB_SETCOUNT sent to non-lazy list box1434: This list box does not support tab stops1435: Cannot destroy object created by another thread1436: Child windows cannot have menus1437: The window does not have a system menu1438: Invalid message box style1439: Invalid system-wide (SPI_*) parameter1440: Screen already locked1441: All handles to windows in a multiple-window position structure must have the same parent1442: The window is not a child window1443: Invalid GW_* command1444: Invalid thread identifier1445: Cannot process a message from a window that is not a multiple document interface (MDI) window1446: Popup menu already active1447: The window does not have scroll bars1448: Scroll bar range cannot be greater than MAXLONG1449: Cannot show or remove the window in the way specified1450: Insufficient system resources exist to complete the requested service1451: Insufficient system resources exist to complete the requested service1452: Insufficient system resources exist to complete the requested service1453: Insufficient quota to complete the requested service1454: Insufficient quota to complete the requested service1455: The paging file is too small for this operation to complete1456: A menu item was not found1457: Invalid keyboard layout handle1458: Hook type not allowed1459: This operation requires an interactive window station1460: This operation returned because the timeout period expired1461: Invalid monitor handle1500: The event log file is corrupted1501: No event log file could be opened, so the event logging service did not start1502: The event log file is full1503: The event log file has changed between read operations1601: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance1602: User cancelled installation1603: Fatal error during installation1604: Installation suspended, incomplete1605: This action is only valid for products that are currently installed1606: Feature ID not registered1607: Component ID not registered1608: Unknown property1609: Handle is in an invalid state1610: The configuration data for this product is corrupt. Contact your support personnel1611: Component qualifier not present1612: The installation source for this product is not available. Verify that the source exists and that you can access it1613: This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service1614: Product is uninstalled1615: SQL query syntax invalid or unsupported1616: Record field does not exist1617: The device has been removed1618: Another installation is already in progress. Complete that installation before proceeding with this install1619: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package1620: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package1621: There was an error starting the Windows Installer service user interface. Contact your support personnel1622: Error opening installation log file. Verify that the specified log file location exists and that you can write to it1623: The language of this installation package is not supported by your system1624: Error applying transforms. Verify that the specified transform paths are valid1625: This installation is forbidden by system policy. Contact your system administrator1626: Function could not be executed1627: Function failed during execution1628: Invalid or unknown table specified1629: Data supplied is of wrong type1630: Data of this type is not supported1631: The Windows Installer service failed to start. Contact your support personnel1632: The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder1633: This installation package is not supported by this processor type. Contact your product vendor1634: Component not used on this computer1635: This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package1636: This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package1637: This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service1638: Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel1639: Invalid command line argument. Consult the Windows Installer SDK for detailed command line help1640: Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator1641: The requested operation completed successfully. The system will be restarted so the changes can take effect1643: The patch package is not permitted by software restriction policy1644: One or more customizations are not permitted by software restriction policy1700: The string binding is invalid1701: The binding handle is not the correct type1702: The binding handle is invalid1703: The RPC protocol sequence is not supported1704: The RPC protocol sequence is invalid1705: The string universal unique identifier (UUID) is invalid1706: The endpoint format is invalid1707: The network address is invalid1708: No endpoint was found1709: The timeout value is invalid1710: The object universal unique identifier (UUID) was not found1711: The object universal unique identifier (UUID) has already been registered1712: The type universal unique identifier (UUID) has already been registered1713: The RPC server is already listening1714: No protocol sequences have been registered1715: The RPC server is not listening1716: The manager type is unknown1717: The interface is unknown1718: There are no bindings1719: There are no protocol sequences1720: The endpoint cannot be created1721: Not enough resources are available to complete this operation1722: The RPC server is unavailable1723: The RPC server is too busy to complete this operation1724: The network options are invalid1725: There are no remote procedure calls active on this thread1726: The remote procedure call failed1727: The remote procedure call failed and did not execute1728: A remote procedure call (RPC) protocol error occurred1730: The transfer syntax is not supported by the RPC server1732: The universal unique identifier (UUID) type is not supported1733: The tag is invalid1734: The array bounds are invalid1735: The binding does not contain an entry name1736: The name syntax is invalid1737: The name syntax is not supported1739: No network address is available to use to construct a universal unique identifier (UUID)1740: The endpoint is a duplicate1741: The authentication type is unknown1742: The maximum number of calls is too small1743: The string is too long1744: The RPC protocol sequence was not found1745: The procedure number is out of range1746: The binding does not contain any authentication information1747: The authentication service is unknown1748: The authentication level is unknown1749: The security context is invalid1750: The authorization service is unknown1751: The entry is invalid1752: The server endpoint cannot perform the operation1753: There are no more endpoints available from the endpoint mapper1754: No interfaces have been exported1755: The entry name is incomplete1756: The version option is invalid1757: There are no more members1758: There is nothing to unexport1759: The interface was not found1760: The entry already exists1761: The entry is not found1762: The name service is unavailable1763: The network address family is invalid1764: The requested operation is not supported1765: No security context is available to allow impersonation1766: An internal error occurred in a remote procedure call (RPC)1767: The RPC server attempted an integer division by zero1768: An addressing error occurred in the RPC server1769: A floating-point operation at the RPC server caused a division by zero1770: A floating-point underflow occurred at the RPC server1771: A floating-point overflow occurred at the RPC server1772: The list of RPC servers available for the binding of auto handles has been exhausted1773: Unable to open the character translation table file1774: The file containing the character translation table has fewer than 512 bytes1775: A null context handle was passed from the client to the host during a remote procedure call1777: The context handle changed during a remote procedure call1778: The binding handles passed to a remote procedure call do not match1779: The stub is unable to get the remote procedure call handle1780: A null reference pointer was passed to the stub1781: The enumeration value is out of range1782: The byte count is too small1783: The stub received bad data1784: The supplied user buffer is not valid for the requested operation1785: The disk media is not recognized. It may not be formatted1786: The workstation does not have a trust secret1787: The security database on the server does not have a computer account for this workstation trust relationship1788: The trust relationship between the primary domain and the trusted domain failed1789: The trust relationship between this workstation and the primary domain failed1790: The network logon failed1791: A remote procedure call is already in progress for this thread1792: An attempt was made to logon, but the network logon service was not started1793: The user's account has expired1794: The redirector is in use and cannot be unloaded1795: The specified printer driver is already installed1796: The specified port is unknown1797: The printer driver is unknown1798: The print processor is unknown1799: The specified separator file is invalid1800: The specified priority is invalid1801: The printer name is invalid1802: The printer already exists1803: The printer command is invalid1804: The specified datatype is invalid1805: The environment specified is invalid1806: There are no more bindings1807: The account used is an interdomain trust account. Use your global user account or local user account to access this server1808: The account used is a computer account. Use your global user account or local user account to access this server1809: The account used is a server trust account. Use your global user account or local user account to access this server1810: The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain1811: The server is in use and cannot be unloaded1812: The specified image file did not contain a resource section1813: The specified resource type cannot be found in the image file1814: The specified resource name cannot be found in the image file1815: The specified resource language ID cannot be found in the image file1816: Not enough quota is available to process this command1817: No interfaces have been registered1818: The remote procedure call was cancelled1819: The binding handle does not contain all required information1820: A communications failure occurred during a remote procedure call1821: The requested authentication level is not supported1822: No principal name registered1823: The error specified is not a valid Windows RPC error code1824: A UUID that is valid only on this computer has been allocated1825: A security package specific error occurred1826: Thread is not canceled1827: Invalid operation on the encoding/decoding handle1828: Incompatible version of the serializing package1829: Incompatible version of the RPC stub1830: The RPC pipe object is invalid or corrupted1831: An invalid operation was attempted on an RPC pipe object1832: Unsupported RPC pipe version1898: The group member was not found1899: The endpoint mapper database entry could not be created1900: The object universal unique identifier (UUID) is the nil UUID1901: The specified time is invalid1902: The specified form name is invalid1903: The specified form size is invalid1904: The specified printer handle is already being waited on1905: The specified printer has been deleted1906: The state of the printer is invalid1907: The user's password must be changed before logging on the first time1908: Could not find the domain controller for this domain1909: The referenced account is currently locked out and may not be logged on to1910: The object exporter specified was not found1911: The object specified was not found1912: The object resolver set specified was not found1913: Some data remains to be sent in the request buffer1914: Invalid asynchronous remote procedure call handle1915: Invalid asynchronous RPC call handle for this operation1916: The RPC pipe object has already been closed1917: The RPC call completed before all pipes were processed1918: No more data is available from the RPC pipe1919: No site name is available for this machine1920: The file can not be accessed by the system1921: The name of the file cannot be resolved by the system1922: The entry is not of the expected type1923: Not all object UUIDs could be exported to the specified entry1924: Interface could not be exported to the specified entry1925: The specified profile entry could not be added1926: The specified profile element could not be added1927: The specified profile element could not be removed1928: The group element could not be added1929: The group element could not be removed1930: The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers1931: The context has expired and can no longer be used2000: The pixel format is invalid2001: The specified driver is invalid2002: The window style or class attribute is invalid for this operation2003: The requested metafile operation is not supported2004: The requested transformation operation is not supported2005: The requested clipping operation is not supported2010: The specified color management module is invalid2011: The specified color profile is invalid2012: The specified tag was not found2013: A required tag is not present2014: The specified tag is already present2015: The specified color profile is not associated with any device2016: The specified color profile was not found2017: The specified color space is invalid2018: Image Color Management is not enabled2019: There was an error while deleting the color transform2020: The specified color transform is invalid2021: The specified transform does not match the bitmap's color space2022: The specified named color index is not present in the profile2102: The workstation driver is not installed2103: The server could not be located2104: An internal error occurred. The network cannot access a shared memory segment2105: A network resource shortage occurred2106: This operation is not supported on workstations2107: The device is not connected2108: The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified2109: The network connection was made successfully using default credentials2114: The Server service is not started2115: The queue is empty2116: The device or directory does not exist2117: The operation is invalid on a redirected resource2118: The name has already been shared2119: The server is currently out of the requested resource 2121: Requested addition of items exceeds the maximum allowed2122: The Peer service supports only two simultaneous users2123: The API return buffer is too small2127: A remote API error occurred2131: An error occurred when opening or reading the configuration file2136: A general network error occurred2137: The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service2138: The Workstation service has not been started2139: The requested information is not available2140: An internal Windows 2000 error occurred2141: The server is not configured for transactions2142: The requested API is not supported on the remote server2143: The event name is invalid2144: The computer name already exists on the network. Change it and restart the computer2146: The specified component could not be found in the configuration information2147: The specified parameter could not be found in the configuration information 2149: A line in the configuration file is too long2150: The printer does not exist2151: The print job does not exist2152: The printer destination cannot be found2153: The printer destination already exists2154: The printer queue already exists2155: No more printers can be added2156: No more print jobs can be added2157: No more printer destinations can be added2158: This printer destination is idle and cannot accept control operations2159: This printer destination request contains an invalid control function2160: The print processor is not responding2161: The spooler is not running2162: This operation cannot be performed on the print destination in its current state2163: This operation cannot be performed on the printer queue in its current state2164: This operation cannot be performed on the print job in its current state2165: A spooler memory allocation failure occurred2166: The device driver does not exist2167: The data type is not supported by the print processor2168: The print processor is not installed2180: The service database is locked2181: The service table is full2182: The requested service has already been started2183: The service does not respond to control actions2184: The service has not been started2185: The service name is invalid2186: The service is not responding to the control function2187: The service control is busy2188: The configuration file contains an invalid service program name2189: The service could not be controlled in its present state2190: The service ended abnormally2191: The requested pause or stop is not valid for this service2192: The service control dispatcher could not find the service name in the dispatch table2193: The service control dispatcher pipe read failed2194: A thread for the new service could not be created2200: This workstation is already logged on to the local-area network2201: The workstation is not logged on to the local-area network2202: The specified username is invalid2203: The password parameter is invalid2204: The logon processor did not add the message alias2205: The logon processor did not add the message alias2206: The logoff processor did not delete the message alias2207: The logoff processor did not delete the message alias2209: Network logons are paused2210: A centralized logon-server conflict occurred2211: The server is configured without a valid user path2212: An error occurred while loading or running the logon script2214: The logon server was not specified. Your computer will be logged on as STANDALONE2215: The logon server could not be found2216: There is already a logon domain for this computer2217: The logon server could not validate the logon2219: The security database could not be found2220: The group name could not be found2221: The user name could not be found2222: The resource name could not be found2223: The group already exists2224: The account already exists2225: The resource permission list already exists2226: This operation is only allowed on the primary domain controller of the domain2227: The security database has not been started2228: There are too many names in the user accounts database2229: A disk I/O failure occurred2230: The limit of 64 entries per resource was exceeded2231: Deleting a user with a session is not allowed2232: The parent directory could not be located2233: Unable to add to the security database session cache segment2234: This operation is not allowed on this special group2235: This user is not cached in user accounts database session cache2236: The user already belongs to this group2237: The user does not belong to this group2238: This user account is undefined2239: This user account has expired2240: The user is not allowed to log on from this workstation2241: The user is not allowed to log on at this time2242: The password of this user has expired2243: The password of this user cannot change2244: This password cannot be used now2245: The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements2246: The password of this user is too recent to change2247: The security database is corrupted2248: No updates are necessary to this replicant network/local security database2249: This replicant database is outdated; synchronization is required2250: This network connection does not exist2251: This asg_type is invalid2252: This device is currently being shared2270: The computer name could not be added as a message alias. The name may already exist on the network2271: The Messenger service is already started2272: The Messenger service failed to start2273: The message alias could not be found on the network2274: This message alias has already been forwarded2275: This message alias has been added but is still forwarded2276: This message alias already exists locally2277: The maximum number of added message aliases has been exceeded2278: The computer name could not be deleted2279: Messages cannot be forwarded back to the same workstation2280: An error occurred in the domain message processor2281: The message was sent, but the recipient has paused the Messenger service2282: The message was sent but not received2283: The message alias is currently in use. Try again later2284: The Messenger service has not been started2285: The name is not on the local computer2286: The forwarded message alias could not be found on the network2287: The message alias table on the remote station is full2288: Messages for this alias are not currently being forwarded2289: The broadcast message was truncated2294: This is an invalid device name2295: A write fault occurred2297: A duplicate message alias exists on the network2298: This message alias will be deleted later2299: The message alias was not successfully deleted from all networks2300: This operation is not supported on computers with multiple networks2310: This shared resource does not exist2311: This device is not shared2312: A session does not exist with that computer name2314: There is not an open file with that identification number2315: A failure occurred when executing a remote administration command2316: A failure occurred when opening a remote temporary file2317: The data returned from a remote administration command has been truncated to 64K2318: This device cannot be shared as both a spooled and a non-spooled resource2319: The information in the list of servers may be incorrect2320: The computer is not active in this domain2321: The share must be removed from the Distributed File System before it can be deleted2331: The operation is invalid for this device2332: This device cannot be shared2333: This device was not open2334: This device name list is invalid2335: The queue priority is invalid2337: There are no shared communication devices2338: The queue you specified does not exist2340: This list of devices is invalid2341: The requested device is invalid2342: This device is already in use by the spooler2343: This device is already in use as a communication device2351: This computer name is invalid2354: The string and prefix specified are too long2356: This path component is invalid2357: Could not determine the type of input2362: The buffer for types is not big enough2370: Profile files cannot exceed 64K2371: The start offset is out of range2372: The system cannot delete current connections to network resources2373: The system was unable to parse the command line in this file2374: An error occurred while loading the profile file2375: Errors occurred while saving the profile file. The profile was partially saved2377: Log file %1 is full2378: This log file has changed between reads2379: Log file %1 is corrupt2380: The source path cannot be a directory2381: The source path is illegal2382: The destination path is illegal2383: The source and destination paths are on different servers2385: The Run server you requested is paused2389: An error occurred when communicating with a Run server2391: An error occurred when starting a background process2392: The shared resource you are connected to could not be found2400: The LAN adapter number is invalid2401: This network connection has files open or requests pending2402: Active connections still exist2403: This share name or password is invalid2404: The device is in use by an active process and cannot be disconnected2405: The drive letter is in use locally2430: The specified client is already registered for the specified event2431: The alert table is full2432: An invalid or nonexistent alert name was raised2433: The alert recipient is invalid2434: A user's session with this server has been deletedbecause the user's logon hours are no longer vali2440: The log file does not contain the requested record number2450: The user accounts database is not configured correctly2451: This operation is not permitted when the Netlogon service is running2452: This operation is not allowed on the last administrative account2453: Could not find domain controller for this domain2454: Could not set logon information for this user2455: The Netlogon service has not been started2456: Unable to add to the user accounts database2457: This server's clock is not synchronized with the primary domain controller's clock2458: A password mismatch has been detected2460: The server identification does not specify a valid server2461: The session identification does not specify a valid session2462: The connection identification does not specify a valid connection2463: There is no space for another entry in the table of available servers2464: The server has reached the maximum number of sessions it supports2465: The server has reached the maximum number of connections it supports2466: The server cannot open more files because it has reached its maximum number2467: There are no alternate servers registered on this server2470: Try down-level (remote admin protocol) version of API instead2480: The UPS driver could not be accessed by the UPS service2481: The UPS service is not configured correctly2482: The UPS service could not access the specified Comm Port2483: The UPS indicated

- Чьи это ошибки?

- Это коды, возвращаемые функцией GetLastError. Только непонятно, зачем они тут нужны, если есть http://msdn.microsoft.com/library/en-us/de...error_codes.asp

- Мда.. катяра, фигней маешься...

- -=::BlackCat::=- Честно скажи: сам составлял или спёр...

- Сам.... генирировал, а потом в Блакноте пустату убирал Добавлено @ 16:11 srd не все копаются в МСДН, я например долго мудохолся, с одной ошибкой так как низнал что она означает

Интернет казино     Онлайн игры     Увеличение члена     Купить DVD